Changing the iTag DBT Batteries

If you are notified you need to change the iTag DBT batteries, you will need two CR2032 batteries.

1. Unscrew the battery door on the back of the iTag DBT using a P0 Phillips screwdriver.
   
2. Replace the batteries with two CR2032.
   
3. Re-install the battery door.
   
4. Tighten the screw using a P0 Phillips screwdriver.
   

For detailed instructions with images and to download the “iTag DBT and iTag Travel App User’s Guide”, see the Reference Documents in the Knowledge Base.

• Related Articles

• iTag DBT and iTag Travel App User's Guide

  Click below to download the iTag DBT and iTag Travel App User's Guide.

• Unregistering an iTag DBT

  If you want to share your iTag DBT with a relative or friend, or your iTag DBT is lost or damaged, you need to “unregister” your iTag DBT first. In the iTag Travel App, tap the Devices tab, then tap the iTag DBT you want to unregister. The iTag ...

• Registering Your iTag DBT (Digital Bag Tag)

  The Devices screen will display registered iTags. If there are no iTags registered, then a message "No active iTags, please register" will be displayed. To register an iTag DBT: In the iTag Travel App, on the Devices tab, tap the blue (+) at the ...

• Attaching the iTag DBT to Baggage

  Using the Strap (included), you will need to perform the following: Measure the size of your baggage with the strap Attach the iTag DBT to the strap Reattach the strap with the iTag DBT to your baggage For detailed instructions with images and to ...

• Attaching the iTag DBT to the Strap

  From the back of the iTag DBT, thread the strap (best to use the doubled section of the strap) through one side, inserting the strap in the longer slot first, then the shorter slot. Then repeat by threading the strap through the other side of the ...